Do you need more info ?
Leave your e-mail address. We will send you full information about this product.
TENAGLASS®-PS EN is two-component polysulphide-based secondary sealant for the production of insulating glass units with a dual seal. Product is supplied in the sets of component A (base) and component B (catalyst). The mix of both components cures in the result of chemical reaction. This product is intended for professional use only. The designed characteristics of the mix are achieved if the application rules are followed.
APPROVALS
The product conforms to the requirements of the EN 1279 standard and is listed by RAL-GZ 520, Applus+, UNI, and AENOR.
PROPERTIES
- One formulation designed for different climate conditions
- Optimal combination of pot life and curing dynamics to reach transportation hardness threshold within 2 hours
- Good adhesion to glass and wide range of spacer materials (e.g., aluminium, stainless steel, different warm edge spacers)
- Low gas and water vapour permeability
- Broad compatibility with various IGU and window elements
- Solvent-free
- Does not contain chlorinated paraffins
- Environmental Product Declaration available
TECHNICAL DATA
|
Packaging
|
Component A: 200 l metal drums
Component B: 20 l or 200 l metal drums
|
|
Chemical base
|
Two-component polysulphide
|
|
Curing mechanism
|
Chemical reaction between A and B components |
|
Shelf life/storage
|
9 months from production date in unopened, undamaged original packaging, in dry place in temperature range from +5°С to +30°С |
RELATED PRODUCTS
Primary sealant: Tenaglass-3
Molecular sieve: Tenasieve